![](https://thermostar.com.br/wp-content/uploads/2021/02/TSA-54_reduzida.png)
TSA 54
Direct Drive
![](https://thermostar.com.br/wp-content/uploads/2021/01/temperatura-alta@2x.png)
*See table below.
Information about this
equipment
![](https://thermostar.com.br/wp-content/uploads/2021/01/icone-congelamento.png)
Cooling capacity up
to -20 ºC;
Manual and automatic hot gas defrost controlled by sensor reducing evaporator blockage;
![](https://thermostar.com.br/wp-content/uploads/2021/01/icone-ar.png)
Compact and flat evaporator with ABS plastic finish, fixed to the truck ceiling providing higher load capacity
![](https://thermostar.com.br/wp-content/uploads/2021/01/icone-refrigeracao.png)
HFC R404A refrigerant (recommended for frozen products);
![](https://thermostar.com.br/wp-content/uploads/2021/01/icone-seguranca.png)
Tested and inspected before shipping, ensuring quality throughout its lifespan.
![](https://thermostar.com.br/wp-content/uploads/2021/01/icone-estrutura.png)
Powder coated structure (Polyester), frontal cover made of ABS plastic and all screws made of stainless steel;
![](https://thermostar.com.br/wp-content/uploads/2021/01/velocidade.png)
Digital controller installed inside of the vehicle’s cabinet;
Contains 2 fans in the condenser and 3 fans in the evaporator (20.000 hours);
![](https://thermostar.com.br/wp-content/uploads/2021/01/painel-de-controle-icone.png)
Control panel with relay, pressure switch for low and high pressure;
![](https://thermostar.com.br/wp-content/uploads/2021/01/Compressor-Heavy-Duty.png)
Heavy Duty Compressor
With dual lubrication, resistant and high quality stainless steel vane, coupled to the vehicle’s engine.
Evaporator
Slim evaporator with ceiling mounting, ABS plastic fairings, and fans with longer service life.
![](https://thermostar.com.br/wp-content/uploads/2021/02/evaporador-NEW.png)
Technical Information
Temperature Table
Truck Body Dimensions | 2m/4m³ | 2,8m/8m³ | 3,5m/12m³ | 4,2m/15m³ | 5m/20m³ | 6,5m/35m³ | 7,5m/42m³ | 8,4m/48m³ |
Temperature (HFC R404A) | — | — | -20 ºC | -20 ºC | -20 ºC | -15 ºC | -10 ºC | — |
Consider temperatures for a new truck body, with polyurethane insulation, 80mm thickness and density of 36/40 kg/m³. Test temperature = 36 ºC.