TSE 50
DIRECT-DRIVE AND ELECTRIC
*See table below.
Information about this
equipment
Cooling capacity up
to -10 ºC;
Manual and automatic hot gas defrost controlled by sensor reducing evaporator blockage;
Automatic voltage selection 220/380V;
Contains 1 fan in the condenser and 3 fans in the evaporator (20.000 hours);
HFC R134a refrigerant (recommended for chilled products);
Tested and inspected before shipping, ensuring quality throughout its lifespan.
Powder coated structure (Polyester), frontal cover made of ABS plastic and all screws made of stainless steel;
Digital controller installed inside of the vehicle’s cabinet;
Compact and flat evaporator with ABS plastic finish, fixed to the truck ceiling providing higher load capacity
Control panel with relay, pressure switch for low and high pressure;
12.5-meter electric cable;
Semi-hermetic Compressor
Mounted with a semi-hermetic compressor coupled to the equipment itself, with lower noise level and consumption, more economical than a standard electric motor.
Semi-hermetic compressor protection against overload.
Evaporator
Slim evaporator with ceiling mounting, ABS plastic fairings, and fans with longer service life.
Technical Information
Temperature Table
Truck Body Dimensions | 2m/4m³ | 2,8m/8m³ | 3,5m/12m³ | 4,2m/15m³ | 5m/20m³ | 6,5m/35m³ | 7,5m/42m³ | 8,4m/48m³ |
Temperature (HFC R134a) | — | — | — | -10 ºC | -5 ºC | 0 ºC | 0 ºC | — |
Consider temperatures for a new truck body, with polyurethane insulation, 80mm thickness and density of 36/40 kg/m³. Test temperature = 36 ºC.